The SmallRig Camera Baseplate review centers on a compact way to add 15mm LWS rod support and tripod mounting options to a compatible camera or cage.
It suits filmmakers who want a straightforward foundation for a modular rig without starting with a larger support system.
SmallRig Baseplate Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Camera Baseplate 1674
A practical option for camera and cage users building a lightweight 15mm LWS rig with flexible tripod attachment.
- Aluminum baseplate, approximately 3.15 × 1.69 × 1.02 inches and 0.17 kg.
- Dual 15mm rod holes with 60mm spacing for LWS accessories.
- Bottom 1/4-inch-20 and 3/8-inch-16 threads for compatible quick-release plates or tripod attachment.
- Can attach directly to a camera or to a camera cage using included 1/4-inch and 3/8-inch fixing screws.
Pros
- Adds standard 15mm LWS rod support in a compact plate.
- Offers both 1/4-inch-20 and 3/8-inch-16 bottom threads for mounting flexibility.
Consider before buying
- The rods, follow focus, matte box, shoulder pad, and tripod are not included.
- Buyers need to verify that the supplied screw sizes and their camera or cage mounting points are compatible.
Read the full review summary
The SmallRig 1674 combines a camera or cage attachment point, dual 15mm rod holes, and bottom tripod threads in a lightweight aluminum plate.
Its 60mm rod spacing supports common LWS accessories such as a follow focus, matte box, or lens support, while included 1/4-inch and 3/8-inch screws allow mounting directly to a camera or cage.
This design is most useful for operators who want to build out a small rig incrementally or move a camera between tripod and shoulder-oriented setups.
Before buying, check that the camera or cage can accept the supplied screw arrangement and that your tripod quick-release plate lines up with the bottom threads; the rods, tripod, and shoulder pad are separate.
The buying factors
SmallRig Baseplate Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Rig flexibility
Dual rod holes and bottom threads give the plate roles in both accessory support and tripod mounting.
Accessory support
The 15mm LWS, 60mm-spaced holes accommodate several common camera-rig accessories.
Mounting options
The bottom includes both 1/4-inch-20 and 3/8-inch-16 threads for compatible quick-release plates or tripod setups.
Camera and cage fit
The included 1/4-inch and 3/8-inch screws and broad compatibility make it adaptable, but buyers should confirm their own mounting layout.
Portability
Its compact dimensions and 0.17 kg weight suit a lighter rig build.
Ready-to-build completeness
Mounting screws and a hex spanner are included, while rods and other rig components must be supplied separately.
Key Features and Specifications of SmallRig Baseplate
- Aluminum baseplate, approximately 3.15 × 1.69 × 1.02 inches and 0.17 kg.
- Dual 15mm rod holes with 60mm spacing for LWS accessories.
- Bottom 1/4-inch-20 and 3/8-inch-16 threads for compatible quick-release plates or tripod attachment.
- Can attach directly to a camera or to a camera cage using included 1/4-inch and 3/8-inch fixing screws.
- Rubber padding on top is designed to help prevent twisting and scratching where the camera or cage meets the plate.
- Package includes the baseplate, one 1/4-inch fixing screw, one 3/8-inch fixing screw, two 1/4-inch-20 screws, and a hex spanner.
Pros and Cons of SmallRig Baseplate
Pros
- Adds standard 15mm LWS rod support in a compact plate.
- Offers both 1/4-inch-20 and 3/8-inch-16 bottom threads for mounting flexibility.
- Can be fixed to a camera or cage, supporting different rig-building approaches.
- Rubber top padding helps protect the mounting contact surface and resist rotation.
Consider before buying
- The rods, follow focus, matte box, shoulder pad, and tripod are not included.
- Buyers need to verify that the supplied screw sizes and their camera or cage mounting points are compatible.
- The plate's compact footprint may not provide the broader accessory layout of a full cage or larger rig system.
Who Should Buy SmallRig Baseplate?
Good fit
Consider the 1674 if you already use, or plan to add, 15mm LWS rods and want a small baseplate that can also connect to a tripod setup.
The dual rod clamp makes it a useful starting point for adding accessories such as a follow focus or lens support without replacing the camera or cage.
It is also a sensible fit for a lightweight build where a camera may move among tripod, shoulder, and other shooting arrangements.
Check your camera or cage's threaded mounting points, the fixing screw you intend to use, and the alignment of your quick-release plate before assembling the full rig.
Who should skip it
Skip this plate if you need a complete ready-to-shoot rig: it provides the mounting foundation, but rods and other accessories are separate purchases.
It is a poor fit for a setup built around a different rod standard or one that does not use a baseplate and 15mm LWS accessories. Confirm your system's rod spacing and mounting requirements before choosing it.
How the SmallRig Baseplate Fits Into a Camera Rig
A compact route to 15mm LWS support
The two 15mm rod holes are the plate's defining feature. Their 60mm spacing is intended for LWS accessories, letting an operator add compatible support gear while retaining a relatively small base under the camera or cage.
Tripod mounting depends on the rest of the setup
Bottom 1/4-inch-20 and 3/8-inch-16 threads create options for connecting a quick-release plate or tripod.
This can make the baseplate a useful transition point between rig components, but the quick-release plate itself is not included, so check its screw and alignment requirements.
Direct camera or cage attachment
The included 1/4-inch and 3/8-inch fixing screws allow the plate to be used on a camera cage or directly on a camera, depending on the available mounting point.
The rubber-padded top is intended to reduce twisting and surface scratching at that contact, while buyers should still use a screw that matches their equipment.
What the compact format leaves to the buyer
The small dimensions and 0.17 kg weight help keep the baseplate itself light, but they do not make it a complete support package. Plan separately for rods, rod-mounted accessories, and any shoulder support needed for your shooting style.
Alternatives to SmallRig Baseplate
Only one supplied option offers a meaningfully different camera-support approach for a related use; the other candidates serve narrower accessory roles or different camera systems.
Video Camera Supports & Stabilizers alternative

700+ ratings
Read Amazon ReviewsSmallRig HawkLock Cage for Sony Alpha 7 Series
Choose the 1674 when your priority is a compact base for 15mm rods and your existing camera or cage already meets your mounting needs.
The Sony cage is the more integrated option for a supported Alpha 7 body when you want camera-specific protection and a broader set of accessory attachment points.
- This cage is designed for specified Sony Alpha 7 models and adds multiple mounting points, a cold shoe, a HawkLock NATO rail, and an Arca-compatible quick-release plate.
- The 1674 is a compact baseplate with 15mm LWS rod support and bottom tripod threads, and it can attach directly to a camera or cage.
Is SmallRig Baseplate Worth It?
The SmallRig Camera Baseplate 1674 is worth considering for a lightweight rig that needs 15mm LWS rods and flexible bottom mounting threads.
Its combination of direct camera or cage attachment, included screws, and rubber padding makes it a practical foundation for a modular setup.
Buy it if your equipment uses the stated rod spacing and mounting points, and you are comfortable sourcing the rods and accessories separately.
If you need a full cage, complete shoulder rig, or another rod system, check those requirements before committing.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Camera Baseplate 1674
A practical option for camera and cage users building a lightweight 15mm LWS rig with flexible tripod attachment.
- Aluminum baseplate, approximately 3.15 × 1.69 × 1.02 inches and 0.17 kg.
- Dual 15mm rod holes with 60mm spacing for LWS accessories.
- Bottom 1/4-inch-20 and 3/8-inch-16 threads for compatible quick-release plates or tripod attachment.
- Can attach directly to a camera or to a camera cage using included 1/4-inch and 3/8-inch fixing screws.