The SmallRig 1138 camera clamp review is for creators who want a compact way to position a camera or accessory on a rod, tube, table, or frame.
Its clamp, dual ball head, 1/4-inch screw, and action-camera adapter make it a flexible mounting option, with a stated load limit of up to 1.5 kg.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A compact clamp for creators who need to attach a small camera or accessory to a rod, tube, table, or frame.
- Dual ball-head clamp mount designed for adjustable positioning.
- Includes a 1/4-inch-20 screw for compatible cameras and accessories.
- Includes an adapter mount for action cameras.
- The locking knob attaches the clamp to a rod, tube, table, frame, or tripod.
Pros
- Combines a clamp and adjustable dual ball head in one small mount.
- Includes both a 1/4-inch-20 connection and an action-camera adapter.
Consider before buying
- The 1.5 kg maximum load rules it out for heavier camera rigs or accessories.
- A dynamic setup calls for an additional safety rope, which is not listed among the included components.
Read the full review summary
The SmallRig 1138 combines a clamping base and dual ball head in a compact accessory, letting you attach supported gear to a range of surfaces without drilling.
The supplied 1/4-inch-20 screw and action-camera adapter give it several connection options, while the locking knob is designed to secure the clamp to a rod, tube, table, or frame.
It suits content creators building a modest camera setup at a desk, in a vehicle, or around a compatible support.
Its size and adaptable mounting points are appealing, but the 1.5 kg maximum load makes it a better match for light accessories than heavier equipment. For moving setups, the manufacturer advises using a safety rope.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp is described for rods, tubes, tables, frames, and tripods, with a 1/4-inch-20 screw and an action-camera adapter included.
Angle adjustment
The dual ball-head layout is designed to let users position mounted gear at a chosen angle.
Device compatibility
The supplied connections cover cameras and a range of light accessories, including action cameras, monitors, lights, microphones, and webcams.
Load range
The maximum stated capacity is 1.5 kg, a useful boundary that favors lighter camera accessories.
Build materials
The clamp uses aluminum and stainless steel, with non-slip threads and an anti-twist structure described as design updates.
Portability
At 0.2 kg and roughly 3.74 by 3.35 by 0.98 inches, it is a compact piece of mounting hardware.
Key Features and Specifications of SmallRig 1138 Clamp
- Dual ball-head clamp mount designed for adjustable positioning.
- Includes a 1/4-inch-20 screw for compatible cameras and accessories.
- Includes an adapter mount for action cameras.
- The locking knob attaches the clamp to a rod, tube, table, frame, or tripod.
- Maximum stated load capacity is 1.5 kg.
- Constructed from aluminum and stainless steel; the clamp is described with non-slip threads and an anti-twist structure.
- Measures approximately 3.74 by 3.35 by 0.98 inches and weighs 0.2 kg.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines a clamp and adjustable dual ball head in one small mount.
- Includes both a 1/4-inch-20 connection and an action-camera adapter.
- Can attach to several kinds of supports without drilling.
- Metal construction and updated anti-twist and non-slip features are aimed at keeping the setup secure.
Consider before buying
- The 1.5 kg maximum load rules it out for heavier camera rigs or accessories.
- A dynamic setup calls for an additional safety rope, which is not listed among the included components.
- Before buying, check that your support fits the clamp and that your device has a compatible connection or adapter.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the SmallRig 1138 if your setup needs a small mounting point for an action camera, compact camera, monitor, light, or microphone.
The clamp can grip a suitable rod, tube, table, frame, or tripod, while its ball-head arrangement offers flexibility when finding a workable shooting angle.
That makes it useful for desk setups and other stationary recording arrangements where a fixed mount would be inconvenient.
The included action-camera adapter and 1/4-inch-20 screw give it practical versatility without requiring a separate connection piece for those mounting styles.
Its stated 1.5 kg capacity provides a clear limit: add up the weight of the device and any attached accessory, and leave room below that ceiling for a sensible setup.
For use around moving equipment or in other dynamic situations, follow the safety-rope guidance and confirm that the rope and attachment point suit your gear.
Also check the support's dimensions and surface before purchasing, since compatibility depends on the clamp gripping it securely.
Who should skip it
Skip this mount if your rig exceeds the 1.5 kg maximum, or if your camera needs a connection that the included 1/4-inch-20 screw and action-camera adapter cannot provide.
A purpose-built support may be a better fit for a heavier or specialized setup.
If you need a mount specifically designed for a particular monitor or cage interface, check that interface before choosing a general-purpose clamp.
How the SmallRig 1138 Clamp Fits a Camera Setup
A clamp that opens up more placement options
The 1138 is designed to fasten to rods, tubes, tables, frames, and tripods, so the camera or accessory does not need to sit directly on a conventional tripod head.
This can help when you want to attach gear to an existing support or place it beside a workstation. Check the surface and clamp fit in your intended position before relying on it.
Dual ball heads for framing adjustments
The dual ball-head design is intended to make angle changes easier while keeping the mount connected to the clamp. This is useful for positioning a small camera or accessory around a fixed support.
How well the final framing works will depend on the mounting point and the clearance around the equipment.
Capacity sets the right scale of equipment
The stated maximum capacity is 1.5 kg, so this mount is best considered for lighter accessories rather than a heavy camera assembly.
Include the weight of anything attached when assessing your setup, and avoid treating the maximum as a target load. In moving scenarios, the safety-rope recommendation is especially relevant.
Included connections reduce setup friction
The package includes a 1/4-inch-20 screw and an action-camera mount adapter, covering two common connection approaches. The manufacturer also lists compatibility with cameras, monitors, lights, microphones, webcams, and action cameras.
Match your specific device to one of the included connections before ordering.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 9.8-Inch Magic Arm Clamp Kit
Choose the 1138 for its compact clamp-and-ball-head arrangement and included action-camera adapter. The 2732 is a better match if you need a longer reach from the clamp or want both 1/4-inch and 3/8-inch threaded options.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm, has 1/4-inch and 3/8-inch threads, and its clamp opens from 15 mm to 54 mm.
- The SmallRig 1138 combines a clamp with a dual ball head and includes an action-camera adapter; its stated maximum capacity is 1.5 kg.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
The 1138 is the more compact choice when one clamping point and a lighter load are sufficient.
Consider the 4103 if your setup needs two clamping points or its higher stated capacity, while checking that your rods fit its specified range.
- The 4103 has two clamps for rods between 14 mm and 60 mm, a 360-degree rotating ball head, and a stated maximum capacity of 3.5 kg.
- The 1138 uses a single clamp with a dual ball head and supports a stated maximum load of 1.5 kg.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 Super Camera Clamp is worth considering for creators who need a compact, adaptable mounting point for a light camera or accessory.
Its dual ball head, multiple support options, 1/4-inch-20 screw, and included action-camera adapter make it useful across several modest setups.
Keep the 1.5 kg maximum load in view, confirm that both your device and support are compatible, and use a safety rope for dynamic scenarios.
If those conditions suit your setup, the 1138 is a practical clamp to consider.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A compact clamp for creators who need to attach a small camera or accessory to a rod, tube, table, or frame.
- Dual ball-head clamp mount designed for adjustable positioning.
- Includes a 1/4-inch-20 screw for compatible cameras and accessories.
- Includes an adapter mount for action cameras.
- The locking knob attaches the clamp to a rod, tube, table, frame, or tripod.